AGFA Digital Camera CL30 User Manual

ePhoto CL30  
User’s Guide  
 
ePhoto CL30 User’s Guide  
3
1-Year Limited Hardware Warranty  
Agfa warrants this product to be free from defects of material and workmanship for one  
(1) year from the date of purchase. During the warranty period, Agfa will repair or  
replace, at its option, the product at no charge to the customer. The replacement unit  
may be a remanufactured unit or a unit of equal or greater functionality. After one (1)  
year, Customer shall pay for all parts, labor and service.  
Agfa warrants that software products will conform to published specifications in effect  
at the time of delivery for 90 days after purchase. Customer acknowledges that the  
Software may have inherent defects because of its complexity. The warranty applies  
only to the media on which the software is recorded.  
If a unit is replaced during the warranty period, the original warranty shall remain in  
effect until the end of the one (1) year period or shall be 30 days, whichever is longer.  
This warranty is transferable with new owner notification to Agfa.  
This warranty shall not apply if Customer:  
1. abuses or modifies Product or Software;  
2. operates the system in an environment with excessive dirt, moisture, chemical  
fumes, extremes of temperature or other improper conditions. The camera is not  
impermeable to water, dust or sand.  
3. supplies other Software or Interfacing.  
4. Uses any adapter other than the Agfa ePhoto AC adapter.  
Warranty service is excluded if the serial number of the product has been tampered  
with or removed.  
THE PARTIES AGREE THAT ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,  
INCLUDING WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE, MERCHANT-  
ABILITY AND NON-INFRINGEMENT, ARE EXCLUDED.  
 
ePhoto CL30 User’s Guide  
5
CONTENTS  
FCC Information Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2  
User Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2  
Canadian Radio Interference Regulations Statement . . . . . . . . 2  
1-Year Limited Hardware Warranty . . . . . . . . . . . . . . . . . . . . . . 3  
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
Camera Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Memory Cards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Inserting a Memory Card . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Memory Card Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Memory Card Conditions . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Battery Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Controlling the Camera. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Mode Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
EasyPilot Button. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
LCD Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Shutter Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Status Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
Taking Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Changing Basic Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
Resolution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Flash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Digital Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
Focus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
Preview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
Changing Advanced Settings . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
Tips on Using the ADVANCED Menu . . . . . . . . . . . . . . . . . 21  
Advanced Settings Icons. . . . . . . . . . . . . . . . . . . . . . . . . . 22  
QuickReview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
Self Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
Exposure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
Contents  
 
6
ePhoto CL30 User’s Guide  
White Point. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
External Flash. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
Automatic. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26  
Video Out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26  
Preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26  
Date & Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
RS232 Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
Working with Captured Images. . . . . . . . . . . . . . . . . . . . . . . . 28  
Using Single-Image View . . . . . . . . . . . . . . . . . . . . . . . . . 28  
Using Multi-Image View . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
Using the Camera with a TV . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
Changing the Type of Video Connection. . . . . . . . . . . . . . 34  
Using the Camera with a Computer . . . . . . . . . . . . . . . . . . . . 35  
System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . 35  
IBM PCs and Compatibles. . . . . . . . . . . . . . . . . . . . . . . . 35  
Installing PhotoWise Software . . . . . . . . . . . . . . . . . . . . . 36  
Connecting to Your Computer . . . . . . . . . . . . . . . . . . . . . 36  
PC Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37  
Transferring Images into Your Computer. . . . . . . . . . . . . 37  
Creating Installation Diskettes for PhotoWise . . . . . . . . . 38  
Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39  
Camera. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39  
AC Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39  
Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39  
Memory Cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40  
Cleaning the Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40  
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41  
Camera Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47  
Contents  
 
ePhoto CL30 User’s Guide  
7
INTRODUCTION  
Your ePhoto CL30 takes high quality digital pictures— and it’s easy  
to use. Just point and click, like a conventional camera. You can  
quickly change the camera settings, too, with the EasyPilot button.  
But the CL30 is more than a conventional camera. You can:  
Check the camera settings on the status display  
Frame pictures with the optical viewfinder or color LCD screen  
Take pictures and immediately review them on the color LCD  
screen or a TV  
Store images on a removable, reusable CompactFlash™ mem-  
ory card—up to 36 images, depending on the resolution.  
Keep only your best shots and delete the rest immediately.  
Quickly load pictures into a computer and print them, or use  
them on the Web, in email or multimedia. No need to scan pic-  
tures.  
Transfer your pictures to a PC with a serial connection or with  
the newer, faster USB connection (requires Windows 98 and a  
computer with a USB connection)  
Take pictures in black and white text mode and use the docu-  
ments in an electronic database and with OCR software  
Introduction  
 
8
ePhoto CL30 User’s Guide  
CAMERA PARTS  
2
1
3
5
4
1. Shutter Button: takes pictures.  
2. Built-in Flash: with 4 settings (automatic, fill-in, “red-eye” and  
off).  
3. Auto-focus Lens: glass, 43mm  
4. Battery Compartment: holds 4 size AA alkaline (included), lith-  
ium or rechargeable NiMH batteries.  
5. Memory Card/Port Compartment: holds a removable Compact-  
Flash memory card and the USB, SERIAL, POWER (AC adapter)  
and VIDEO OUT ports.  
Camera Parts  
 
ePhoto CL30 User’s Guide  
9
8
7
6
9
10  
11  
6. EasyPilot™ Button: scrolls through menu options (when  
turned) and makes a selection (when pressed).  
7. Optical Viewfinder: frames pictures. Use instead of the color  
LCD to conserve battery power.  
8. Status Display: displays information about the memory card,  
batteries, the number of pictures remaining, and the camera  
settings.  
9. Mode Switch: turns the camera on (REC to take pictures or  
PLAY to view stored images) and OFF.  
10. LCD Switch: turns the color LCD screen ON and OFF, or selects  
the PC mode, which you use when you connect your camera to  
a computer.  
11. Color LCD: displays the live image (like the viewfinder), cap-  
tured images, and the camera’s built-in menu system.  
Camera Parts  
 
10  
ePhoto CL30 User’s Guide  
MEMORY CARDS  
The ePhoto CL30 has no internal memory. All pictures are stored on  
removable CompactFlash™ memory cards. These cards are avail-  
able in 2 - 96 MB sizes.  
The ePhoto CL30 accepts only CompactFlash removable  
memory cards.  
Inserting a Memory Card  
To insert a memory card:  
1. Open the door of the memory card/port compartment.  
2. Insert the memory card (included) and push it all the way into  
the slot. The card can only be inserted one way.  
3. Close the door.  
Memory Card Capacity  
Your camera comes with one 4 MB CompactFlash card, whose stor-  
age capacity depends on the resolution of the images. For more  
information, see Resolution on page 18.  
Memory cards can store images in any combination of  
resolutions.  
Memory Card Conditions  
Certain memory card conditions are indicated on the color LCD and  
on the Status Display from time to time. On the color LCD, you may  
see a message such as No card!  
On the Status Display, you’ll see a memory card icon. When the icon  
is flashing, it indicates that:  
No memory card has been inserted.  
Memory Cards  
 
ePhoto CL30 User’s Guide  
11  
The memory card is the wrong type or is unreadable. To refor-  
mat the card, press the EasyPilot button, turn it to select YES  
and then press it in to begin the reformatting process.  
Selecting YES erases all data stored on the memory card.  
The memory card is full. To take more pictures, do one of the  
following:  
Insert a new memory card.  
Lower the resolution. See Resolution on page 18.  
Transfer the pictures to your computer. See PC Mode on  
page 37.  
Delete some or all of the images. See Deleting Images on  
page 29.  
Memory Cards  
 
12  
ePhoto CL30 User’s Guide  
BATTERIES  
For best results, use batteries of the following types:  
Battery Average Pictures  
Notes  
Type  
Per Charge  
Lithium  
600  
Recommended: Energizer® Hi  
Energy Lithium.  
NiMH  
Alkaline  
300  
200  
Rechargeable.  
Use only brands specifically  
made for “high-drain” devices  
(such as Duracell ULTRA®).  
Battery life can be greatly extended by using the optional  
Agfa AC adapter to power the camera indoors.  
To install the batteries:  
Slide the Mode switch to OFF.  
Unlock the door of the battery compartment.  
Press down on the door and slide it, in the direction of the  
arrow, until it releases.  
Lift up the door and insert the four batteries as shown in the  
battery compartment and on the compartment door.  
Press down on the door, slide it into place and lock it.  
Battery Conditions  
A battery icon is displayed on the Status Display. Segments disap-  
pear as power is used. When only an outline displays, replace the  
batteries as soon as possible. A flashing icon indicates that the bat-  
teries are empty. You cannot use the camera until you replace the  
batteries.  
Batteries  
 
ePhoto CL30 User’s Guide  
13  
CONTROLLING THE CAMERA  
Mode Switch  
Slide the Mode switch to select:  
REC — to turn on the camera and take pictures.  
PLAY — to turn on the camera and view or delete stored  
images.  
OFF — to turn off the camera.  
When the ePhoto CL30 is not connected to a computer, the camera  
powers down automatically after 60 seconds (REC or PLAY) of inac-  
tivity. To turn the camera back on, press the EasyPilot button.  
When the camera is using batteries, turn off the camera when  
it is idle to conserve the life of the batteries.  
EasyPilot Button  
Use the EasyPilot button to navigate the menus. To:  
Display— Press the button to display a menu.  
Select — Press the button to select the highlighted icon or the  
setting indicated by the arrow.  
Scroll — Turn the button in either direction to move from one  
menu option or icon to another.  
LCD Switch  
Slide the LCD switch to turn the color LCD screen ON or OFF. When  
you connect the camera to a computer, slide the switch to PC.  
Controlling the Camera  
 
14  
ePhoto CL30 User’s Guide  
Shutter Button  
The shutter button has two positions. Press the shutter button:  
Halfway — to lock the camera’s focus and calculate the  
exposure.  
All the way — to take a picture.  
The camera sets the autofocus and calculates exposure,  
so there may be a slight delay before the picture is taken.  
Controlling the Camera  
 
ePhoto CL30 User’s Guide  
15  
STATUS DISPLAY  
The Status Display is the black and white LCD on top of the camera.  
Using icons, it displays information about your camera and some of  
the settings that you selected, including the following:  
Status of the batteries. See Batteries on page 12.  
Status of the CompactFlash memory card. See Memory Card  
Conditions on page 10.  
Number of pictures that can still be taken at the current resolu-  
tion setting. (e.g., 3 )  
Resolution setting. See Resolution on page 18.  
Flash setting. See Flash on page 18.  
Focus setting. See Focus on page 19.  
Exposure setting. See Exposure on page 23.  
Self-timer setting. See Self Timer on page 23.  
External flash setting. See External Flash on page 25.  
Status Display  
 
16  
ePhoto CL30 User’s Guide  
TAKING PICTURES  
Like a conventional camera, the ePhoto CL30 has a viewfinder. You  
can also frame the image on the color LCD. Before you can take pic-  
tures, install the batteries and a CompactFlash memory card.  
To take pictures:  
1. Slide the Mode switch to REC.  
2. If you want to view the image on the color LCD, slide the LCD  
switch to ON. The LCD displays the Agfa logo briefly and then  
the live image.  
3. Select your settings. See Changing Basic Settings on page 17.  
4. Frame the picture in the viewfinder or on the color LCD.  
5. Press the shutter button halfway to lock the focus and calculate  
the exposure. Press it all the way down to take the picture.  
The camera processes the image. The green Ready light on the  
back of the camera blinks. If the color LCD is on, the image is  
“drawn” on the screen. After a few seconds, the live image  
appears on the LCD and the camera is ready for the next shot.  
If the QuickReview option is on, the color LCD displays a  
menu as the image is processed. See QuickReview on  
page 22.  
Taking Pictures  
 
ePhoto CL30 User’s Guide  
17  
CHANGING BASIC SETTINGS  
You can change the basic camera settings with the icon menu that  
displays on the color LCD. The basic settings are:  
Resolution  
Flash  
Digital zoom  
Focus  
Preview  
You can also access advanced settings  
from this menu. See  
Changing Advanced Settings on page 21.  
The resolution, flash, and Video Out settings remain in  
effect until you change them, even after you turn the cam-  
era off.  
To change a basic setting:  
1. Slide the Mode switch to REC.  
2. Press the EasyPilot button. A row of icons appears on the color  
LCD.  
You do not have to turn on the color LCD to display the  
menu.  
3. Turn the EasyPilot button to highlight an icon.  
4. Press the EasyPilot button to select the icon. A column of icons  
or a text menu appears.  
5. Turn the EasyPilot button to highlight an icon or option.  
6. Press the EasyPilot button to select the setting.  
Changing Basic Settings  
 
18  
ePhoto CL30 User’s Guide  
Resolution  
The ePhoto CL30 provides the following JPEG resolution settings:  
Setting  
Description  
P-Genie: 1440 x 1080, pixels: highest image quality  
and lowest compression. Utilitizes PhotoGenie™ tech-  
nology during download (ideal for printing photo-qual-  
ity images)  
Maximum 4 MB card capacity: 6 images*  
High: 1152 x 864 pixels, low compression  
Maximum 4 MB card capacity: 12 images*  
Medium: 1024 x 768 pixels.  
Maximum 4 MB card capacity: 16 images*  
Low: 640 x 480 pixels, normal compression (ideal for  
posting images on the Web)  
Maximum 4 MB card capacity: 36 images*  
Black & white text mode: optimal compression for  
saving text-based documents.  
Maximum 4 MB card capacity: 30 images*  
* Depending on the complexity of the images stored, the memory  
card capacity may be up to 20% higher.  
Flash  
The ePhoto CL30 provides the following flash settings:  
Setting  
Description  
Automatic: the camera determines when to use the  
flash  
Changing Basic Settings  
 
ePhoto CL30 User’s Guide  
19  
Setting  
Description  
Off: no flash is used  
Red-eye: controlled pre-flashing is used to reduce the  
“red-eye” effect  
Fill-in: flash is always used  
Digital Zoom  
The digital zoom feature lets you zoom into the center of the picture.  
Setting  
Description  
1x: digital zoom is off (default).  
2x: digital zoom is applied. This option automatically  
sets the resolution to LOW.  
Focus  
This option allows you to choose a focal distance manually for your  
shots. For best results, the setting should match the distance of the  
subject from the lens.  
Icon  
Setting Selected  
Automatic  
Changing Basic Settings  
 
20  
ePhoto CL30 User’s Guide  
Icon  
Setting Selected  
an automatic focus mode for subjects 8" to 3 ft (20 to  
90 cm) away  
a fixed distance mode, for subjects about 3 ft (1 m)  
away  
a fixed distance mode, for subjects about 7 ft (2 m)  
away  
a fixed distance mode, for subjects about 16 ft (5 m)  
away  
a fixed distance mode, for subjects more than 16 ft  
(5m) away  
Preview  
The ePhoto CL30 provides two preview settings:  
Setting  
Description  
Normal: shows the lighting conditions as seen through  
the lens (default).  
Low light: increases the contrast on the LCD screen.  
Displays dark scenes more brightly on the color LCD  
(only) so you can see the details more clearly. The  
actual image you capture may look different, depending  
on which flash and other settings you use.  
Changing Basic Settings  
 
ePhoto CL30 User’s Guide  
21  
CHANGING ADVANCED SETTINGS  
You can change advanced settings with the icon menu that displays  
on the color LCD. The advanced settings are:  
QuickReview  
Self Timer  
Exposure  
White point  
External flash  
Automatic  
Video out  
Preferences  
Date & Time  
RS232 speed  
For information on how to change the basic settings, see Changing  
Basic Settings on page 17.  
To change an advanced setting:  
1. Slide the Mode switch to REC.  
2. Press the EasyPilot button. A row of icons appears on the LCD.  
3. Turn the EasyPilot button until the  
icon is highlighted.  
4. Press the EasyPilot button. The first part of the ADVANCED  
menu appears. Turn the EasyPilot button to see more options.  
Tips on Using the ADVANCED Menu  
The Automatic option restores the automatic settings.  
Use the Exit option to leave the menu system without making  
any changes.  
Changing Advanced Settings  
 
22  
ePhoto CL30 User’s Guide  
You can set the camera to remember some advanced settings  
after the camera is powered off. See Preferences on page 26.  
Advanced Settings Icons  
For some of the manual settings, a small icon displays on the Status  
Display or on the ADVANCED menu as a reminder.  
QuickReview  
QuickReview lets you to decide whether to keep or erase a photo  
immediately after you capture it. You can delete a picture before it  
has finished processing.  
To select QuickReview:  
1. Select QuickReview in the ADVANCED menu. The QUICK  
REVIEW menu appears.  
2. Select On and then exit the ADVANCED menu.  
3. Frame the picture and press the shutter button. The image dis-  
plays on the LCD with the option to Discard (delete) or Share  
(keep the picture on the LCD) the photo.  
4. Turn the EasyPilot button to select an option, and press the but-  
ton.  
5. If you select Share, the LCD displays the options Discard or  
Cont. (save the image).  
6. Turn the EasyPilot button to select an option, and press the but-  
ton.  
Changing Advanced Settings  
 
ePhoto CL30 User’s Guide  
23  
Self Timer  
The self timer delays the shutter after you press the shutter button  
(for example, so you can set the camera and join the picture).  
Icon  
Setting Selected  
Delays the shutter for 10 seconds after  
you press the shutter button  
To turn on the self timer:  
1. Select Self timer in the ADVANCED menu. The SELF TIMER  
menu appears.  
2. Select On or Off and then exit the ADVANCED menu.  
3. Frame the picture and press the shutter button. The red light  
stays on for 5 seconds, blinks for 5 seconds and then the cam-  
era takes a picture.  
The self timer applies only to the next picture. Set the self  
timer for each picture individually.  
Exposure  
Use this option to manually adjust the lightness or darkness of an  
image.  
To set the exposure manually:  
1. Select Exposure in the ADVANCED menu. The EXPOSURE  
screen appears with a vertical scale. The settings on the scale  
are automatic or manual, in 0.5 f-stops that range from +4 to -4.  
2. Scroll the EasyPilot button up (+) to increase the exposure or  
down (–) to decrease it.  
3. Press the EasyPilot button to set the exposure you want to use  
and then exit the ADVANCED menu.  
Changing Advanced Settings  
 
24  
ePhoto CL30 User’s Guide  
White Point  
This option lets you manually adjust the color balance of an image  
so that the colors appear natural in any light.  
Icon  
Setting Selected  
Manual white point  
To set the white point manually:  
1. Select White point in the ADVANCED menu.  
2. Select Set white bal. A message prompts you to aim the cam-  
era and press the EasyPilot button.  
3. Aim the camera at a white area, and press the EasyPilot button.  
A confirmation screen appears.  
For best results, use a reflective white surface, such as a  
card, that fills the LCD entirely.  
4. To save the white point, select Yes. To ignore the white point  
and return to the camera’s automatic white balance, select No.  
The image on the LCD changes to reflect the new white point.  
Changing Advanced Settings  
 
ePhoto CL30 User’s Guide  
25  
External Flash  
Your ePhoto CL30 can be used with any external flash equipped  
with a white light slave sensor. Whenever a picture is taken, the  
external flash is triggered by a low-power burst of light from the  
camera’s built-in flash.  
Icon  
Setting Selected  
External flash  
The external flash settings are:  
Small 1/200  
Large 1/200  
Small 1/100  
Large 1/100  
Off  
The sizes refer to the aperture size, and the times (in sec-  
onds) indicate the shutter speed.  
To use an external flash:  
1. Select Ext. flash in the ADVANCED menu.  
2. Select a large or small aperture based on these ranges:  
Large: f/2.8 – 3.5, wide – telephoto  
Small: f/8.0 – 9.1, wide – telephoto  
Changing Advanced Settings  
 
26  
ePhoto CL30 User’s Guide  
3. Select your shutter speed based on these criteria:  
1/100: High-energy type external flash (typically over 1500  
watts)  
1/200: Low-energy type external flash (typically under 1500  
watts)  
4. Adjust the power settings of the external flash power supply  
while taking pictures to find the proper exposure.  
For best results with your equipment, experiment with different  
aperture, shutter speed, and external flash settings.  
Automatic  
Select the Automatic option in the ADVANCED menu to restore the  
camera’s advanced settings to their automatic defaults.  
Video Out  
Use the Video out option in the ADVANCED menu to select the type  
of video format you need to connect your camera to a TV. The  
options are NTSC or PAL. In general, NTSC is used in the United  
States and Japan; PAL is used in Europe.  
Preferences  
This option lets you save the advanced settings, even after the cam-  
era is turned off.  
To save your advanced settings:  
1. Set your advanced settings as desired.  
2. Select Preferences in the ADVANCED menu.  
3. Select Yes to save the settings.  
Changing Advanced Settings  
 
ePhoto CL30 User’s Guide  
27  
Date & Time  
Each image is tagged electronically with the date and time it was  
taken. So it is important to make sure that the date and time are set  
properly.  
The date is shown in the following format: mm/dd/yyyy  
(month/day/year). The time uses a 24-hour clock.  
To set the date and time:  
1. Select Date & Time in the ADVANCED menu. The SET DATE &  
TIME screen appears with the arrow pointing to the date.  
2. If you want to change the time in the next line, turn the EasyPi-  
lot button to move the arrow down.  
3. Press the EasyPilot button to underline the first item in the line.  
4. To change the value, turn the EasyPilot button.  
5. Press the EasyPilot button to select the value.  
6. Continue to turn and press the EasyPilot button to set the date  
and time (using a 24-hour clock).  
7. Select Set to confirm the date and time or Exit to leave them  
unchanged.  
RS232 Speed  
If you have problems transferring images to your computer, it may  
be that your computer cannot handle the speed at which the camera  
transfers images. You can use this option to change the transfer  
speed of the camera. The RS232 speeds available are:  
9600  
19200  
38400  
115200 (the default)  
Changing Advanced Settings  
 
28  
ePhoto CL30 User’s Guide  
WORKING WITH CAPTURED IMAGES  
You can use the ePhoto CL30 PLAY mode to view and work with  
captured images in two different views:  
Single-image view  
Multi-image view  
To select a view:  
1. Slide the Mode switch to PLAY. The color LCD displays the last  
picture taken, in single-image view.  
2. To select another view, press the EasyPilot button. A row of  
icons appears on the LCD with the  
icon highlighted.  
3. Press the EasyPilot button. Up to nine thumbnail images display  
on the LCD.  
If no images are stored, you see the message No Picture!  
You can reformat the memory card at this point or switch  
to REC to take a picture. To reformat, press the EasyPilot button  
and select Yes on the confirmation screen.  
4. To return to single-image view, press the EasyPilot button again  
and select the  
icon.  
Using Single-Image View  
Scrolling through the Images  
To scroll through captured images:  
1. Scroll through the images by turning the EasyPilot button.  
If you are viewing one image at a time, it is helpful to  
display the image counters and the date and time.  
See Displaying Information on page 31.  
Working with Captured Images  
 
ePhoto CL30 User’s Guide  
29  
2. When you reach the last image, as indicated by the counter  
(e.g., 3/3), you can scroll further to go back to the first image.  
You may scroll this way in a continuous loop.  
Deleting Images  
To delete images:  
1. Press the EasyPilot button. A row of icons appears on the LCD.  
2. Turn the EasyPilot button to highlight the  
icon.  
3. Press the EasyPilot button. The DELETE PICTURES menu  
appears.  
4. Select the desired option:  
Current — to delete a single image.  
All — to delete all images.  
Reformat — to delete all images and reformat the memory  
card.  
Exit — to leave the menu without deleting any images.  
5. If you select Current or All, a confirmation screen appears.  
Select Yes to delete the image(s) and exit the menu, or No to  
leave the menu without deleting any images.  
If the image is locked against accidental deletion (marked  
with the  
icon), you cannot delete the image until you  
unlock it. To unlock it, see the next section.  
Locking/Unlocking Images  
To lock/unlock images in single-image mode:  
1. Press the EasyPilot button. A row of icons appears on the LCD.  
2. Turn the EasyPilot button to highlight the  
icon. The LOCK/  
UNLOCK menu appears.  
Working with Captured Images  
 
30  
ePhoto CL30 User’s Guide  
3. Select the desired option:  
Lock/Unlock — to lock/unlock the current image.  
This option immediately locks (  
icon) the current image.  
icon) or unlocks (no  
Lock all — to lock all images.  
Unlock all — to unlock all locked images.  
Exit — to leave the menu without making any changes.  
4. If you select Lock all or Unlock all, a confirmation screen  
appears. Select Yes to lock/unlock the images and exit the  
menu, or No to leave the menu without locking/unlocking any  
images.  
Zooming in on an Image Digitally  
The camera’s digital 2x zoom allows you select part of an image and  
zoom in on it.  
To zoom in on an image digitally:  
1. Press the EasyPilot button. A row of icons appears on the LCD.  
2. Turn the EasyPilot button to highlight the  
icon.  
3. Press the EasyPilot button. Vertical crop lines frame the middle  
of the image.  
4. If you want to select an area to the left or right of the vertical  
crop lines, turn the EasyPilot button to move the lines.  
5. Press the EasyPilot button. Horizontal crop lines frame the mid-  
dle of the image.  
6. If you want to select an area above or below the horizontal crop  
lines, turn the EasyPilot button to move the lines.  
Working with Captured Images  
 
ePhoto CL30 User’s Guide  
31  
7. Press the EasyPilot button to zoom in on the part of the image  
that you selected. You can also turn the EasyPilot button to view  
other parts of the image.  
8. To return to normal view, press the EasyPilot button.  
Displaying Information  
You can display the image counters and the date and time in single-  
image view.  
To display information for each image:  
1. Press the EasyPilot button. A row of icons appears on the LCD.  
2. Turn the EasyPilot button to highlight the  
icon. The INFO.  
LEVEL menu appears.  
3. Select the desired option:  
No Info — to display no information.  
Level 1 — to display the image counters.  
Level 2 — to display the image counters and the date and  
time.  
Exit — to leave the menu without making any changes.  
Using Multi-Image View  
Viewing Images  
To view multiple images at one time:  
1. Press the EasyPilot button. A row of icons appears on the LCD  
with the  
icon highlighted.  
2. Press the EasyPilot button. The LCD displays up to 9 numbered  
thumbnail images, with the current image selected (outlined by  
a white frame).  
Working with Captured Images  
 
32  
ePhoto CL30 User’s Guide  
You cannot display the image counters and date and time  
in multi-image mode.  
3. Turn the EasyPilot button in either direction to scroll through  
the thumbnails. When you reach the last thumbnail on the  
screen, you can scroll further to add a new row of thumbnails to  
the screen (if there are more than 9 images). You can scroll this  
way in a continuous loop.  
Deleting Images  
You can mark one image at a time and then delete the marked  
image(s), or you can delete all of the images at once.  
To delete images in multi-image mode:  
1. Press the EasyPilot button. A row of icons appears on the LCD.  
2. Turn the EasyPilot button to highlight the  
icon.  
3. Press the EasyPilot button. The DELETE PICTURES menu  
appears.  
4. Select the desired option:  
Mark & Delete — to select an image(s) to delete.  
All — to delete all of the images.  
Exit — to leave the menu without deleting any images.  
5. If you selected Mark & Delete, the Select image screen  
appears. Turn the EasyPilot button to scroll to the image you  
want to delete and press the button. The DELETE PICTURES  
menu appears. Select the desired option:  
Mark/Unmark. — to mark an image for deletion with a red  
X or to remove the deletion mark from the image.  
If you see the word Protected instead of Mark, the image  
is locked. To unlock the image, see the next section.  
Next — to select another image for deletion.  
Working with Captured Images  
 
ePhoto CL30 User’s Guide  
33  
Done — to exit the menu. If you marked images for dele-  
tion, a confirmation screen appears. Select Yes to delete all  
of the images marked for deletion, or No to leave the menu  
without deleting any image.  
Locking/Unlocking Images  
To lock/unlock images:  
1. Press the EasyPilot button. A row of icons appears on the LCD.  
2. Turn the EasyPilot button to highlight the  
icon.  
3. Press the EasyPilot button. The LOCK/UNLOCK menu appears.  
4. Select the desired option:  
Mark & Lock — to lock one or more images.  
Mark & Unlock — to unlock one or more images.  
Lock all — to lock all images.  
Unlock all — to unlock all locked images.  
Selecting Lock all or Unlock all brings up a confirmation  
screen. Select Yes to lock/unlock the images and exit the  
menu, or No to return to the LOCK/UNLOCK menu.  
Exit — to leave the menu without locking/unlocking any  
images.  
5. If you selected Mark & Lock or Mark & Unlock, the Select  
image screen appears. Turn the EasyPilot button to select the  
image to be locked/unlocked.  
6. In the LOCK/UNLOCK menu that appears, select Lock/Unlock.  
7. To lock/unlock more images, select Next and repeat steps 5 and 6.  
8. When you are finished locking/unlocking, select Done.  
Working with Captured Images  
 
34  
ePhoto CL30 User’s Guide  
USING THE CAMERA WITH A TV  
You can connect the ePhoto CL30 to a television via the video cable  
(included) so that you can view captured images or take pictures.  
The video cable works with any type of television.  
To conserve batteries, use the optional AGFA AC adapter when  
you connect the camera to a TV.  
Changing the Type of Video Connection  
When you connect your camera to a TV, you may need to change  
the type of video connection. The options are:  
NTSC, generally used in the United States and Japan  
PAL, used in Europe  
To change the type of video connection:  
1. Press the EasyPilot button. A row of icons appears on the LCD.  
2. Turn the Easy Pilot button to highlight the  
icon.  
3. Turn the EasyPilot to Video out and press the button. The  
VIDEO OUT menu appears.  
4. Select NTSC or PAL.  
To view images on a TV:  
1. Plug one end of the video cable into the VIDEO OUT port on the  
camera.  
2. Plug the other end of the video cable into the video input jack on  
the TV.  
3. Slide the Mode switch to REC or PLAY. The TV screen now takes  
the place of the camera’s LCD.  
For information on using external devices with your TV,  
refer to the documentation for your television set.  
Using the Camera with a TV  
 
ePhoto CL30 User’s Guide  
35  
USING THE CAMERA WITH A COMPUTER  
Before you can transfer images to your computer, you install the  
Agfa PhotoWise software and then connect the ePhoto CL30 to your  
computer. The software and cables are included with your camera.  
System Requirements  
IBM PCs and Compatibles  
486 processor or later (Pentium® recommended)  
Windows 95/98 or Windows NT (3.51 or later)  
16 MB RAM  
50 MB available hard disk space  
VGA monitor with support for at least 256 colors  
2x CD-ROM drive (required for installation)  
9-pin RS-232C serial port or USB port  
Macintosh  
System 7.5.3 or higher  
68040 processor (PowerPC™ recommended)  
16 MB RAM  
50 MB available hard disk space  
Color monitor with support for at least 256 colors  
2x CD-ROM drive (required for installation)  
Printer, modem, or USB port  
Using the Camera with a Computer  
 
36  
ePhoto CL30 User’s Guide  
Installing PhotoWise Software  
Install PhotoWise software from the PhotoWise CD (included).  
Windows — The installation begins automatically.  
Macintosh — Double-click on the PhotoWise install icon on the CD.  
This process installs the software and two documents in Adobe  
Acrobat .pdf format: PhotoWise Tips and a copy of this user’s guide.  
If you install PhotoWise on a Windows 98 computer and  
want to use the USB port to transfer images, you may be  
prompted to install USB support. See USB Notes (shipped in  
the box with your camera) for information.  
Connecting to Your Computer  
Your ePhoto CL30 comes with a serial cable, a Mac adapter, and a  
USB (Universal Serial Bus) cable.  
Serial vs. USB Cable  
The cable you use to connect the camera to a computer depends on  
the type of connection that your computer supports. Use these  
guidelines to select a cable:  
Cable  
Operating System  
Comments  
Serial  
Windows 95, Windows Supported by most PC and  
NT, Mac OS 7.5.3 or  
higher  
Macintosh computers.  
Transfers images at about  
8KB/sec.  
USB  
Windows 98, MacOS  
8.1, iMac and other USB 100 KB/sec.  
compliant systems  
Transfers images at about  
Using the Camera with a Computer  
 
ePhoto CL30 User’s Guide  
37  
Using the Serial Cable  
To use the serial cable to connect the camera to your computer:  
1. Plug one end of the serial cable (included) into the SERIAL port  
on your camera.  
2. Depending on your operating system:  
Plug the other end of the cable into a serial port on  
your computer.  
Connect the other end of the cable to the Mac adapter  
cable (included). Then plug the adapter into your  
Mac’s printer or modem port.  
Using the USB Cable  
You can use the USB cable on a computer that has a USB port and  
software support (see the table on page 36).  
Before you can use the USB connection, you may need to  
install the USB support from the PhotoWise CD. For  
details, see USB Notes (shipped in the box with your camera).  
PC Mode  
When you connect the camera to a computer, slide the Mode switch  
to PLAY or REC, and slide the LCD switch to PC.  
Transferring Images into Your Computer  
You can use PhotoWise to transfer images from the ePhoto CL30 to  
your computer. See PhotoWise Tips or on-line help for details. As  
you transfer images to the computer, the images taken with the  
PhotoGenie resolution are enhanced to true 1440 x 1080 resolution.  
Using the Camera with a Computer  
 
38  
ePhoto CL30 User’s Guide  
Creating Installation Diskettes for PhotoWise  
Use this procedure to create diskettes so you can install PhotoWise  
on systems that do not have a CD-ROM drive.  
Use blank, formatted diskettes when prompted and label  
them by number (i.e., Disk 1, 2, 3, 4).  
To create PhotoWise installation floppy disks:  
Windows  
1. Place the PhotoWise CD in the CD-ROM drive of your computer.  
2. In the Start menu, select Run.  
3. In the dialog window that appears, type:  
d:mkfloppy.exe  
where d is the letter of your CD-ROM drive.  
4. Click on OK.  
5. Follow the prompts.  
Macintosh  
1. Place the PhotoWise CD in the CD-ROM drive of your computer.  
2. Double-click on the Make Floppies application icon on the out-  
ermost level of the CD.  
3. Follow the prompts.  
Using the Camera with a Computer  
 
ePhoto CL30 User’s Guide  
CARE AND MAINTENANCE  
Camera  
39  
To avoid the risk of electric shock, do not disassemble  
the camera. Refer all servicing to qualified service per-  
sonnel.  
To avoid the risk of fire or electric shock, do not expose  
the camera to rain or moisture.  
Avoid leaving the camera in the sun or in a very warm location  
(beach, car, etc.) for prolonged periods.  
Do not wrap the camera in cloth or plastic while it is on (heat  
and moisture may be trapped and damage the camera).  
Avoid using the camera in excessively cold (below 32°F/0°C)  
or excessively warm (above 104°F/40°C) conditions.  
When you bring the camera from a cold to a warm location,  
allow the camera to reach room temperature before you use it.  
If condensation develops inside the camera, stop using it imme-  
diately. Leave the camera at room temperature for a few hours  
to allow the condensation to evaporate.  
AC Adapter  
Use only the optional Agfa ePhoto AC adapter with your  
camera. Use of any other adapter will void your warranty  
and may damage the camera.  
Batteries  
Before installing the batteries, slide the Mode switch to OFF.  
Use only size AA alkaline, lithium or NiMH batteries.  
Care and Maintenance  
 
40  
ePhoto CL30 User’s Guide  
Do not use batteries that show signs of leakage, corrosion or  
swelling, or batteries that are excessively warm.  
If necessary, clean battery contacts with a dry cloth before  
installation.  
Always replace all four batteries with four identical, new (or fully  
charged) ones.  
Dispose of used batteries promptly in a manner that complies  
with applicable laws.  
Keep all batteries away from children.  
To conserve the batteries, use the viewfinder (not the color  
LCD) to frame an image  
Memory Cards  
Keep memory cards away from sources of heat, moisture and static  
electricity, as well as magnetic fields generated by electrical appli-  
ances such as TVs, VCRs and microwave ovens.  
Cleaning the Camera  
To clean the camera lens or LCD, blow away any surface dust or  
dirt. Then breathe on the surface to form a mist and gently wipe  
it with a soft, lint-free cloth or lens cleaning tissue.  
To avoid scratching the lens, use a gentle, circular motion when  
wiping.  
Never use harsh or abrasive cleaners on the outside surfaces of  
the camera. Wipe off dust with a clean, dry cloth.  
Care and Maintenance  
 
ePhoto CL30 User’s Guide  
41  
TROUBLESHOOTING  
If you have a problem using your ePhoto CL30, review this section  
first. If you cannot find the solution to your problem here, visit Agfa  
on-line at www.agfahome.com/ephoto or check with your dealer.  
Problem  
Possible Cause/Solution  
The camera has The camera is turned off. Slide the Mode  
no power.  
switch to REC or PLAY.  
The camera is inactive due to the automatic  
power down feature. Press the EasyPilot  
button to turn it back on.  
The camera is connected to a computer (the  
Status Display displays PC). The camera has  
power, but can be controlled only from the  
computer.  
The batteries are too weak. Replace them. If  
you are using the optional Agfa AC adapter,  
make sure it is securely plugged into a work-  
ing outlet.  
Troubleshooting  
 
42  
ePhoto CL30 User’s Guide  
Problem  
The shutter but-  
Possible Cause/Solution  
The camera is still saving a picture. Wait  
ton doesnt work. for the live image to appear on the LCD.  
The camera is in PLAY. Turn the Mode  
switch to REC.  
The memory card is full (flashing card icon  
on the Status Display). Download the images  
to your computer, delete some or all of the  
images, insert a different memory card or  
lower the resolution.  
The camera is connected to a computer.  
The camera can be controlled only in Photo-  
Wise.  
The LCD doesnt The camera is connected to a computer.  
turn on.  
Disconnect the camera or use the camera  
controls in PhotoWise.  
The camera is connected to a TV. Discon-  
nect the camera or view the images on your  
TV set.  
The batteries are too weak. Replace them.  
The LCD switch is OFF. Slide the LCD switch  
to ON.  
The live image on The subject is in low light. The ePhoto CL30  
the LCD appears automatically adjusts exposure to the light  
jerky.  
conditions.  
Troubleshooting  
 
ePhoto CL30 User’s Guide  
43  
Problem  
Possible Cause/Solution  
The low light preview setting is selected.  
on the LCD looks This setting is used to display a dark scene  
The live image  
brighter than it  
more brightly on the LCD to help you frame  
should be.  
the shot. Use the setting to take a dark pic-  
ture, or restore the normal preview setting.  
You have selected an incorrect advanced  
exposure setting. If the  
or  
icon is  
displayed, adjust the exposure setting or set  
it to automatic.  
The built-in flash The flash is off. Check the flash setting.  
doesnt work.  
The wrong date  
and/or time are  
displayed.  
The date and time are incorrectly set. Set  
the correct date and time.  
The recorded  
image is blurry.  
The subject moved while you were taking  
the picture. Hold the camera steady and take  
the picture again.  
You moved the camera while you were tak-  
ing the picture. Take the picture again and  
hold the camera steady as you depress the  
shutter button.  
You used the wrong focus setting. Make  
sure the subject’s distance from the lens and  
the focus setting match. The flash illuminates  
subjects up to a distance of only about 10  
feet (2.6 m).  
Troubleshooting  
 
44  
ePhoto CL30 User’s Guide  
Problem  
Possible Cause/Solution  
The recorded  
image is too  
dark.  
There was not enough light. Set the flash to  
the Auto or Fill-in setting.  
The subject was too far away for the flash.  
The flash illuminates subjects up to a dis-  
tance of only about 10 feet (2.6 m).  
You selected an incorrect advanced setting.  
Readjust the setting or set it to automatic.  
You can also use PhotoWise to adjust the  
brightness and contrast of your image.  
If the flash was in the Fill-in mode, there  
was too much light. Change the flash setting  
to Auto.  
The recorded  
image is too  
bright.  
The camera was pointed directly at a bright  
light. Take the picture from a different angle.  
You can also use PhotoWise to adjust the  
brightness and contrast of your image.  
You selected an incorrect advanced setting.  
Readjust the setting or set it to automatic.  
You were too close to the subject (i.e.,  
Macro) to use the flash. Turn off the flash  
and take the picture again.  
Troubleshooting  
 
ePhoto CL30 User’s Guide  
45  
Problem  
Possible Cause/Solution  
PhotoWise cant The camera is off. Slide the Mode switch to  
PLAY or REC. Slide the LCD switch to PC.  
find the camera.  
The serial cable is connected incorrectly.  
Check the cable and connections.  
The batteries are too weak. Replace them.  
The serial port setting is incorrect. Your  
PC’s serial port should be dedicated to the  
ePhoto CL30. If your computer is running  
other software packages in the background  
that periodically check the serial port (e.g.,  
personal digital assistants), turn those pro-  
grams off.  
There is an internal device conflict in your  
computer. Check the documentation that  
came with your computer and/or Windows.  
Troubleshooting  
 
46  
ePhoto CL30 User’s Guide  
Problem  
Possible Cause/Solution  
PhotoWise cant The camera is off. Slide the Mode switch to  
PLAY or REC. Slide the LCD switch to PC.  
find the camera.  
The serial cable is connected incorrectly.  
Check the cable and connections.  
The batteries are too weak. Replace them.  
AppleTalk is active. Turn off AppleTalk  
before using PhotoWise.  
There is a port conflict. If the serial cable is  
connected to the modem port, turn off any  
fax/modem software running in the back-  
ground and disable any fax extensions.  
Apple Performa 6400/ 5400:  
The serial cable may have grounding prob-  
lems. For best results, update your operating  
system to System 7.6.1 or higher. If you can-  
not update your system, disconnect the cam-  
era, reboot the computer and reconnect the  
camera.  
G3 Mac: Check Apple’s technical support at  
There is an internal device conflict in your  
computer. Check the documentation that  
came with your computer and/or Mac OS.  
An image cant be The image is locked. Unlock the image.  
deleted.  
Troubleshooting  
 
ePhoto CL30 User’s Guide  
47  
CAMERA SPECIFICATIONS  
Parameter  
Specifications  
Physical  
Dimensions  
1.45" H x 5" W x 3.16" D  
(37 x 127.5 x 80.3 mm)  
Weight  
Other  
9.4 oz or 265 g (without batteries)  
Tripod mountable (1/4" x 20, standard 35  
mm photo/video)  
Optics  
f/2.8 – 8.0  
50 cm – infinity  
20cm – 90cm  
Lens Aperture  
Focal Range  
Macro Focal  
Distance  
Focal Length  
Shutter Speed  
ISO Rating  
43.44 mm equivalent  
1/30 – 1/700 seconds, automatic  
ISO 100  
CCD Image  
Sensor  
CCD, 1 million (1158 x 876) pixels  
Flash  
Auto, Fill-in, Redeye, Off  
1.8" TFT LCD  
LCD Screen  
Images  
Compression  
JPEG (internal)  
Camera Specifications  
 
48  
ePhoto CL30 User’s Guide  
Parameter  
Resolution  
Specifications  
— P-Genie, 1440 x 1080 pixels, lowest  
compression  
— High, 1152 x 864 pixels, low com-  
pression  
Medium, 1024 x 768 pixels  
— Low, 640 x 480 pixels, normal com-  
pression  
— Black & white document mode, 1152  
x 864 pixels  
Storage  
Removable CompactFlash memory cards  
(2 MB – 96 MB), no internal memory  
Storage Capacity  
— 6 images  
— 12 images  
— 16 images  
— 36 images  
— 30 images  
Power  
Source  
4 AA alkaline, lithium, or NiMH batteries  
Battery Life  
(NiMH)  
Continuous play: approx. 1 hour  
Continuous record: approx. 30 minutes  
Other Source  
Optional Agfa AC adapter  
Operation  
Startup Time  
< 8 seconds  
Shutter Delay  
Time  
Approx. 1000 ms, including auto-focus  
Camera Specifications  
 
ePhoto CL30 User’s Guide  
49  
Parameter  
Specifications  
— 11 seconds  
— 6 seconds  
Average Image  
Processing Time  
(REC)  
Computer  
Interface  
Serial, RS-232C  
USB  
Transmission  
Speed  
Serial: 8MB/sec  
USB: 100 KB/sec  
Video Output  
NTSC or PAL. Switch in menu system.  
Power Down  
Timer  
REC: 60 seconds  
PLAY: 60 seconds  
Self Timer  
Exposure  
10 seconds, Off  
1/2, 1/4, 1/8, 1/15, 1/30, 1/60, 1/125, 1/250  
Environment  
Levelness  
Altitude  
Can be operated at all angles  
Up to 11,800 ft (3,600 m) above sea level  
Temperature  
Operating: 32 – 104°F (0 – 40°C)  
Storage: 4 – +140°F (-20 – +60°C)  
Relative Humidity 10 – 90%, non-condensing  
Camera Specifications  
 
For more information about the Agfa ePhoto CL30 digital camera,  
visit the Agfa Web site at www.agfahome.com/ephoto.  
© 1998 Agfa Corporation. All Rights Reserved.  
 

Acer Personal Computer P216HV User Manual
AEG Power Supply Protect A500 User Manual
Agri Fab Tiller 45 03083 User Manual
AKG Acoustics Microphone D 542 ST S User Manual
AKG Acoustics Microphone D3700M User Manual
Alcatel Carrier Internetworking Solutions Network Router Switch Router User Manual
Alesis Musical Instrument iMultiMix 8 USB User Manual
American Audio CD Player PRO DJ 3 User Manual
Audiovox Car Stereo System AVDINPC User Manual
Beko Hair Dryer BKK 2168 User Manual